Vibrant

Stainless Steel Braided Flex Hose

Operating temperature range: -40°F (-40°C) to 300°F (150°C)

  • Stainless steel braided cover (to resist against abrasion and corrosion) surrounds a reinforced synthetic rubber inner liner.
  • Suitable for oil, water, fuel, methanol, coolant and vacuum service. E85 Friendly.
  • NOT suitable for use as brake lines or other hydraulic pressure lines.

Size I.D. O.D. Operating
Pressure
Burst
Pressure
2ft Roll
Part No.
5ft Roll
Part No.
10ft Roll
Part No.
20ft Roll
Part No.
50ft Roll
Part No.
4AN 0.22" (5.6mm) 0.44" (11.2mm) 1000psi 6000psi 11904 11934 11914 11924 -
6AN 0.34" (8.6mm) 0.55" (14mm) 1000psi 6000psi 11906 11936 11916 11926 11946
8AN 0.44" (11.2mm) 0.63" (15.9mm) 1000psi 5000psi 11908 11938 11918 11928 11948
10AN 0.56" (14.2mm) 0.83" (21.1mm) 1000psi 5000psi 11910 11940 11920 11930 11949
12AN 0.68" (17.3mm) 0.95" (24.1mm) 1000psi 3750psi 11912 11942 11922 11932 -
16AN 0.89" (22.6mm) 1.20" (30.5mm) 750psi 2500psi 11913 11943 11923 11933 -
20AN 1.125" (28.6mm) 1.40" (35.6mm) 500psi 2000psi 11915 11945 11925 11935 -

Stainless Steel Braided Flex Hose

Operating temperature range: -40°F (-40°C) to 300°F (150°C)

All Black

  • The black nylon braided outer cover provides excellent abrasion resistance.
  • A flexible stainless steel inner core reinforces the synthetic rubber inner liner for improved strength.
  • Up to 40% lighter than Stainless Steel Braided Flex Hoses.
  • Suitable for oil, water, fuel, methanol, coolant and vacuum service. E85 Friendly

Black/Blue

Black/Red

Size I.D. O.D. Operating
Pressure
Burst
Pressure
2ft Roll
Part No.
5ft Roll
Part No.
10ft Roll
Part No.
20ft Roll
Part No.
50ft Roll
Part No.
4AN 0.22" (5.6mm) 0.44" (11.2mm) 500psi 2000psi 11954 11984 11964 11974 -
6AN 0.34" (8.6mm) 0.55" (14mm) 1000psi 6000psi 11904 11934 11914 11924 -
4AN 0.22" (5.6mm) 0.44" (11.2mm) 500psi 2000psi 11956 11986 11966 11976 *11996
8AN 0.44" (11.2mm) 0.63" (15.9mm) 500psi 2000psi 11958 11988 11968 11978 *11998
10AN 0.56" (14.2mm) 0.83" (21.1mm) 500psi 2000psi 11960 11990 11970 11980 *12000
12AN 0.68" (17.3mm) 0.95" (24.1mm) 350psi 1400psi 11962 11992 11972 11982 *12002
16AN 0.89" (22.6mm) 1.20" (30.5mm) 350psi 1400psi 11963 11993 11973 11983 *12003
20AN 1.125" (28.6mm) 1.40" (35.6mm) 350psi 1400psi 11965 11995 11975 11985 -

Please Note:

  • Any part number denoted with an asterix (*) is available only in All Black braid.
  • All other items are available in All Black braid, Black/Blue braid and Black/Red braid.
  • Add "B" after part number for Black/Blue braid (e.g. 11954B).
  • Add “R” after part number for Black/Red braid (e.g. 11954R).

Flex Hose Inner Support Springs (sold in 4 foot Lengths)

A support spring provides your braided flex hoses with critical support to avoid collapse under extreme vacuum or if attempting very tight bends

Part No. Hose Size
17306 6AN
17308 8AN
17310 10AN
17312 12AN
17316 16AN
17320 20AN

Aluminum Swivel Hose End Fittings, Female AN

Vibrant swivel-style Hose End Fittings deliver the type of quality, reliability, smooth flow and ease of assembly that industry professionals demand. Made from 6061 Aluminum Alloy, these lightweight fittings are suitable for use in oil, fuel, coolant and vacuum applications and feature double PTFE O-Ring seals for leak-free service when installed properly. Best of all, they look great too. Our signature Double Anodized and polished finish delivers remarkable color consistency from one batch to the next. Available in anodized black finish only. Suitable for use with all Vibrant Braided Flex Hoses (please refer to Page 7).

Straight

30°

45°

60°

90°

120°

150°

180°

AN Hose Size

Hose End Style 4AN 6AN 8AN 10AN 12AN 16AN 20AN
Straight 21004 21006 21008 21010 21012 21016 21020
30° 21304 21306 21308 21310 21312 21316 21320
45° 21404 21406 21408 21410 21412 21416 21420
60° 21604 21606 21608 21610 21612 21616 21620
90° 21904 21906 21908 21910 21912 21916 21920
120° 21204 21206 21208 21210 21212 21216 21220
150° 21504 21506 21508 21510 21512 21516 21520
180° 21804 21806 21808 21810 21812 21816 21820

90° Tight Radius Forged Hose End Fittings,Female AN

Part No. Hose Size
21986 6AN
21988 8AN
21990 10AN
21992 12AN
21996 16AN

Straight Swivel Hose End Fittings,Male AN Flare

Part No. Hose Size
24006 6AN
24008 8AN
24010 10AN
24012 12AN
2401 16AN

TECH TIP

Vibrant Performance Heat Protect Flexible Sleeving protects your Braided Flexible Race Hoses from ambient temperatures up to 500°F (260°C)
.These sleeves are easy to install, will not melt, delaminate or become brittle under normal operating conditions and provides a professional solution to your thermal protection needs.
See Page 11 to view our complete assortment of Wire and Hose Protection Products.

45° and 90° Swivel Hose End Fittings, Male ORB

Please Note: Includes O-Ring

AN
Hose Size
Male ORB
Thread Size
45°
Part No.
90
Part No.
6AN 4 ORB (7/16"-20) 24400 24900
6AN 6 ORB (9/16"-18) 24402 24902
6AN 8 ORB (3/4"-16) 24403 24903
8AN 6 ORB (9/16"-18) 24404 24904
8AN 8 ORB (3/4"-16) 24405 24905
8AN 10 ORB (7/8"-14) 24406 24906
10AN 8 ORB (3/4"-16) 24407 24907
10AN 10 ORB (7/8"-14) 24408 24908
10AN 12 ORB (1 1/16"-12) 24409 24909
12AN 10 ORB (7/8"-14) 24410 24910
12AN 12 ORB (1 1/16"-12) 24411 24911
16AN 12 ORB (1 1/16"-12) 24412 24912
16AN 16 ORB (1 5/16"-12) 24414 24914

Straight Swivel Hose End Fittings,
Male

45° and 90° Swivel Hose End Fittings, Male NPT

Part
No.
AN Hose
Size
Male NPT
Size
26000 6AN 1/8" NPT
26001 6AN 1/4" NPT
26002 6AN 3/8" NPT
26003 8AN 1/4" NPT
26004 8AN 3/8" NPT
26005 8AN 1/2" NPT
26006 10AN 3/8" NPT
26007 10AN 1/2" NPT
26008 12AN 1/2" NPT
26009 12AN 3/4" NPT
26010 16AN 3/4" NPT
AN
Hose Size
Male NPT
Size
45°
Part No.
90
Part No.
6AN 1/8" 26400 26900
6AN 1/4" 26401 26901
6AN 3/8" 26402 26902
8AN 1/4" 26403 26903
8AN 3/8" 26404 26904
8AN 1/2" 26405 26905
10AN 3/8" 26406 26906
10AN 1/2" 26407 26907
12AN 1/2" 26408 26908
12AN 3/4" 26409 26909
16AN 3/4" 26410 26910

TECH TIP

Vibrant Performance Hose End and Adapter Fittings are suitable for E85 service, as are all Vibrant Performance Braided Flex Hoses

Replacement Hose End Sockets

AN Size Black
Part No.
Blue
Part No.
Red
Part No.
Chrome
Part No.
4AN 20954 20954B 120954R 20954S
4AN 0.22" (5.6mm) 0.44" (11.2mm) 1000psi 1000psi
6AN 20956 20956B 20956R 20956S
8AN 20958 20958B 20958R 20958S
10AN 20960 20960B 20960R 20960S
12AN 20962 20962B 20962R 20962S
16AN 20966 20966B 20966R 20966S
20AN 20970 20970B 20970R 20970S

Push-On Style Rubber Flex Hose

Operating temperature range: -40°F (-40°C) to 212°F (100°C).

  • Designed for use with Vibrant Push-On Style Hose Ends and Fittings.
  • Suitable for oil, water, fuel, methanol, coolant and vacuum service. E85 Friendly.
  • Available only in black.

Please Note:

  • Hose Clamps are required to secure push-on style hose to fittings if
  • All other items are available in All Black braid, Black/Blue braid and Black/Red braid.
AN Hose
Size
Hose
I.D.
Hose
O.D.
10ft Roll
Part No.
20ft Roll
Part No.
50ft Roll
Part No.
Operating
Pressure
4AN 0.25" (6.4mm) 0.47" (11.9mm) 16314 16324 16354 250psi
6AN 0.375" (9.5mm) 0.625" (15.9mm) 16316 16326 16356 250psi
8AN 0.50" (12.7mm) 0.75" (19.1mm) 16318 16328 16358 250psi
10AN 0.625" (15.9mm) 0.90" (22.9mm) 16320 16330 16360 250psi
12AN 0.75" (19.1mm) 1.03" (26.2mm) 16322 16332 16362 250psi

Push-On Style Hose End Fittings, Female AN

Vibrant Push-On Style Hose End Fittings are manufactured from 6061 aluminum alloy. These lightweight fittings allow for easy and secure hose assembly. Available in anodized black finish only. Suitable for use with all Vibrant Push-On Style Flex Hose.

Straight

30°

45°

60°

90°

120°

150°

180°

AN Hose Size

Hose End Style 4AN 6AN 8AN 10AN 12AN
Straight 22004 22006 22008 22010 22012
30° 22304 22306 22308 22310 22312
45° 22404 22406 22408 22410 22412
60° 22604 22606 22608 22610 22612
90° 22904 22906 22908 22910 22912
120° 22204 22206 22208 22210 22212
150° 22504 22506 22508 22510 22512
180° 22804 22806 22808 22810 22812

TECH TIP

Vibrant Performance Hose End and Adapter Fittings are suitable for E85 service, as are all Vibrant Performance Braided Flex Hoses

Wire and Hose Protection

Flexible Split Sleeving

Nominal Size Sleeve Length Part No
0.25" (6.4mm) 10.00' (3.048m) 25800
0.50" (12.7mm) 10.00' (3.048m) 25801
0.75" (19.1mm) 10.00' (3.048m) 25802
1.00" (25.4mm) 5.00' (1.524m) 25804
1.50" (38.1mm) 5.00' (1.524m) 25806

Available in black only

Lightweight and easy to install due to the unique self-wrap-ping split braid that allows for the addition or removal of wires, hoses or cables without disassembly. No need for fasteners like cable ties or tape, as these sleeves feature a 25% edge overlap and allow for tight radius bending without distorting. Use a Hot Knife to cut this sleeving to prevent fraying

Heat Protect Flexible Sleeving

Nominal Size 2' Length
Part No.
5 ' Length
Part No.
Use with
AN Hose
0.50" (12.7mm) 25840 25810 4AN
0.625" (15.9mm) 25845 25815 6AN
0.75" (19.1mm) 25841 25811 8AN
0.875" (22.2mm) 2 25842 25812 10AN
1.00" (25.4mm) 25843 25813 12AN
1.25" (31.8mm) 25846 25816 16AN
1.50" (38.1mm7 25847 25817 20AN

Available in black only Sold in 2ft. and 5ft. lengths

These silicone wrapped fiberglass sleeves provide protection from ambient temperatures up to 500°F (260°C).

This sleeving is highly flexible and engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks, as well as containing radiant heat. Resists automotive chemicals and solvents, and provides protection from abrasion, punctures and moisture.

EXTREMESHIELD 1200 Flexible Tubing

Nominal Size Sleeve Length Part No.
0.50" (12.7mm) 5.00' (1.524m) 25820
0.75" (19.1mm) 5.00' (1.524m) 25821
1.00" (25.4mm) 5.00' (1.524m) 25822
1.25" (31.8mm) 5.00' (1.524m) 25823
1.50" (38.1mm) 5.00' (1.524m) 25824

Available in Silver only

EXTREMESHIELD 1200 Flexible Tubing provides easy slip-on installation and offers outstanding protection for your wires, hoses and cables from temperatures up to 1200°F (650°C).

Features an aluminized heat shield that is laminated onto tightly braided fiberglass insulation which provides superior protection from radiant heat. This tubing is not expandable so be sure to measure your application carefully

EXTREMESHIELD 1400 Flexible Reflective Wrap

Nominal Size Sleeve Length Part No.
0.50" (12.7mm) 4.00' (101.6mm) 25830
0.75" (19.05mm) 4.00' (101.6mm) 25831
1.00" (25.4mm) 4.00' (101.6mm) 25832
1.25" (31.75mm) 4.00' (101.6mm) 25833
1.50" (38.1mm) 4.00' (101.6mm) 25834

Available in Silver Only

EXTREMESHIELD 1400 Thermal Wrap allows for easy installation on lines and hoses that are difficult to disassemble. Features an aluminized outer layer that is then bonded to insulating, selfwrapping fiberglass. Simply wrap the split tubing around your components and seal it with the included "peel and stick" high temperature self-adhesive strip. Designed to withstand and reflect temperatures up to 1400°F (760°C). Can be cut to size with a simple pair of scissors.

Spark Plug Boot Insulator

Protect your spark plug wires at the connection to the boot with these easy, slip on braided Fiberglass Insulation Sleeves. Protects up to 1200° F (650°C) and requires minimal clearance from the heat source.

Stainless Steel Cable Ties

Ideal for installing/securing heavy duty and high temperature sleeving.

Part
No.
Nominal
Size
Quantity Color
25890 0.75" (19.1mm) 4 / pack Natural
25891 0.75" (19.1mm 4 / pack Black
Part No. Size Quantity
25895 7.5" long 10 / pack
25898 14.5" long 10 / pack

Male AN Flare Union Adapters

Straight

45°

90°

Female AN Flare Union Adapters

Straight

45°

90°

AN
Size
Straight Adapter
Part No.
45° Adapter
Part No.
90° Adapter
Part No.
3AN 10230 10570 10550
4AN 10231 10571 10551
6AN 10232 10572 10552
8AN 10233 10573 10553
10AN 10234 10574 10554
12AN 10235 10575 10555
16AN 10236 10576 10556
20AN 10237 - -
AN
Size
Straight Adapter
Part No.
45° Adapter
Part No.
90° Adapter
Part No.
3AN 10700 N/A N/A
4AN 10701 10711 10731
6AN 10702 10712 10732
8AN 10703 10713 10733
10AN 10704 10714 10734
12AN 10705 10715 10735
16AN 10706 10716 10736
6AN x 8AN 10708 - -
8AN x 10AN 10709 - -

Male AN Flare UnionReducer Adapters

Part
No.
Size
1
Size
2
10430 4AN 3AN
10431 6AN 4AN
10428 8AN 4AN
10432 8AN 6AN
10433 10AN 6AN
10434 10AN 8AN
10438 12AN 6AN
10435 12AN 8AN
10436 12AN 10AN
10439 16AN 10AN
10437 16AN 12AN
104270 20AN 12AN
10429 20AN 16AN

Female AN to Male
ANFlare Reducer Adapters

Part
No.
Female
Size
Male
Size
10830 4AN 3AN
10832 6AN 4AN
10833 8AN 6AN
10834 10AN 6AN
10835 10AN 8AN
10836 12AN 8AN
10837 12AN 10AN
10838 16AN 12AN
10839 20AN 16AN

Female AN to Male
ANFlare Expander Adapters

part No. Female
Size
Male
Size
10840 3AN 4AN
10841 4AN 6AN
10842 6AN 8AN
10843 8AN 10AN
10844 10AN 12AN
10845 12AN 16AN
10846 16AN 20AN

Female AN to Male
AN Flare Extension Adapters

part N0. AN
Size
Adapter
Length
10585 4AN 1.00” (25.4mm)
10586 6AN 1.00” (25.4mm)
10587 8AN 1.50” (38.1mm)
10588 10AN 1.50” (38.1mm)
10589 12AN 1.50” (38.1mm)
10590 16AN 1.50” (38.1mm)

TECH TIP

Vibrant Performance Hose End and Adapter Fittings are suitable for E85 service, as are all Vibrant Performance Braided Flex Hoses

Female AN to Male AN Flare 45° and 90° Adapters

45°

90°

Female
Size
Male
Size
45° Adapter
Part No.
90° Adapter
Part No.
3AN 3AN 10770 10780
4AN 4AN 10771 10781
6AN 6AN 10772 10788
8AN 8AN 10773 107810
10AN 10AN 10774 10784
12AN 12AN 10775 10785
16AN 16AN 10776 10786

Male AN Flare Bulkhead Adapters

Straight

45°

90°

Bulkhead Tee

Bulkhead Tee on Run

Nut

AN
Size
Straight Bulkhead
Part No.
45° Bulkhead
Part No.
90° Bulkhead
Part No.
Bulkhead Tee
Part No.
Bulkhead Tee on
Run Part No.
Bulkhead Nut
Part No.
3AN 10680 10600 10608 10616 10624 10690
4AN 10681 10601 10609 10617 10625 10691
6AN 10682 10602 10610 10618 10626 10692
8AN 10683 10603 10611 10619 10627 10693
10AN 10684 10604 10612 10620 10628 10694
12AN 10685 10605 10613 10621 10629 10695
16AN 10686 10606 10614 10622 10630 10696

Flare AN Tee Adapters

AN Size Male
Flare
Tee
Part No.
Female
Flare
Tee
Part No.
Female
Flare
Tee
Part No.
Female
Flare
Tee
Part No.
3AN 10480 N/A 10740 10790
4AN 10481 10871 10741 10791
6AN 10482 10872 10742 10792
8AN 10483 10873 10743 10793
10AN 10484 10874 10744 10794
12AN 10485 - 10745 10795
16AN 10486 - 10746 10796

Male Flare Tee

Female Flare Tee

Male Flare Tee with Female on Run

Male Flare Tee with Femaleon Side

Male AN Flare to Pipe Tee Adapters

Male Flare Tee with Pipe Thread on Side

Male Flare Tee with Pipe Thread on Run

AN Size NPT
Size
Male Flare Tee
with Pipe on Side
Tee
Part No.
Male Flare Tee
with Pipe on Run
Tee
Part No.
3AN 1/8" 10460 10470
4AN 1/8" 10461 10471
6AN 1/4" 10462 10472
8AN 3/8" 10463 10473
10AN 1/2" 10464 10474
12AN 3/4" 10465 10475
16AN 1” 10466 10476

Male AN Flare to Metric Adapters (includes Crush Washer)

Male AN Flare to Male ORB Adapters (includes O-Ring)

Part
No.
AN
Size
Metric
Size
16602 4AN M8x1.0
16603 4AN M8x1.25
16604 4AN M10x1.0
16605 4AN M10x1.25
16606 4AN M10x1.5
16607 4AN M12x1.0
16608 4AN M12x1.25
16609 4AN M12x1.5
16611 4AN M14x1.5
16612 6AN M10x1.0
16613 6AN M10x1.25
16614 6AN M10x1.5
16615 6AN M12x1.25
16616 6AN M12x1.5
10229 6AN M14x1.5
16619 6AN M16x1.5
10298 6AN M18x1.5
16620 4AN M20x1.5
16621 6AN M22x1.5
16630 8AN M10x1.0
16622 8AN M10x1.5
Part
No.
AN
Size
Metric
Size
16623 8AN M12x1.25
16624 8AN M12x1.5
16625 8AN M14x1.5
16626 8AN M16x1.5
16627 8AN M18x1.5
16628 8AN M20x1.5
16629 8AN M22x1.5
16632 10AN M12x1.5
16633 10AN M14x1.5
16634 10AN M16x1.5
16635 10AN M18x1.5
16636 10AN M20x1.5
16637 10AN M22x1.5
16638N 10AN M24x1.5
16642 12AN M14x1.5
16643 12AN M16x1.5
16644 12AN M18x1.5
16645 12AN M20x1.5
16646 12AN M22x1.5
16647 12AN M24x1.5
16649 16AN M22x1.5

Single Banjo Adapter Assembly, Male AN(includes pair of crush washers)

Part No. Male Flare
AN Size
Male ORB
Thread Size
16821 4AN 4 ORB (7/16" – 20)
16822 4AN 6 ORB (9/16" – 18)
16823 4AN 8 ORB (3/4" – 16)s
16825 6AN 4 ORB (7/16" – 20)
16826 6AN 6 ORB (9/16" – 18)
16827 6AN 8 ORB (3/4" – 16)
16828 6AN 10 ORB (7/8" – 14)
16830 8AN 6 ORB (9/16" – 18)
16831 8AN 8 ORB (3/4" – 16)
16832 8AN 10 ORB (7/8" – 14)
16833 8AN 12 ORB (1 1/16" – 12)
16834 10AN 6 ORB (9/16" – 18)
16835 10AN 8 ORB (3/4" – 16)
16836 10AN 10 ORB (7/8" – 14)
16837 10AN 12 ORB (1 1/16" – 12)
16838 10AN 16 ORB (1 5/16" – 12)
16839 12AN 8 ORB (3/4" – 16)
16840 12AN 10 ORB (7/8" – 14)
16841 12AN 12 ORB (1 1/16" – 12)
16842 12AN 16 ORB (1 5/16" – 12)
16844 16AN 12 ORB (1 1/16" – 12)
16845 16AN 16 ORB (1 5/16" – 12)
16847 20AN 16 ORB(1 5/16" – 12)
16848 20AN 20 ORB (1 5/8" – 20)

Single Banjo Adapter Assembly, Male AN(includes pair of crush washers)

Part No. Banjo
Size
Bolt
Size
11500 3AN M8x1.0
11501 3AN M8x1.25
11502 3AN M10x1.0
11503 3AN M10x1.5
11504 3AN M12x1.0
11505 3AN M12x1.5
11510 4AN M8x1.0
11511 4AN M8x1.25
11512 4AN M10x1.0
11513 4AN M10x1.5
11514 4AN M12x1.0
11515 4AN M12x1.5
Part No. Banjo
Size
Bolt
Size
11520 6AN M10x1.0
11521 6AN M10x1.5
11522 6AN M12x1.0
11523 6AN M12x1.5
11524 6AN M14x1.5
11525 6AN M16x1.5
11530 8AN M10x1.0
11531 8AN M10x1.5
11532 8AN M12x1.0
11533 8AN M12x1.5
11534 8AN M14x1.5
11535 8AN M16x1.5
Part No. Female
AN Size
Male ORB
Thread Size
16860 6AN 6 ORB (9/16" – 18)
16862 6AN 8 ORB (3/4" – 16)
16861 8AN 6 ORB (9/16" – 18)
16863 8AN 8 ORB (3/4" – 16)
16866 8AN 10 ORB (7/8" – 14)
16864 10AN 8 ORB (3/4" – 16)s
16867 10AN 10 ORB (7/8" – 14)
16870 10AN 12 ORB (1 1/16" – 12)
16868 12AN 10 ORB (7/8" – 14)
16871 12AN 12 ORB (1 1/16" – 12)

Male AN Flare to Male NPT Adapters

Steel Straight Adapter

Aluminum Straight Adapter

45° Adapter

90° Adapter

AN Size NPT Size Material Straight Adapter
Part No.
45° Adapter
Part No.
90° Adapter
Part No.
3AN 1/8” Steel 10290 - -
4AN 1/8” Steel 10292 - -
3AN 1/8” Al 10291 10240 10250A
3AN 1/4" Al 10176 - -
4AN 1/8 Al 10293 10241 10251A
4AN 1/4" Al 10216 10238 10256
4AN 3/8” Al 10213 - 10286
6AN 1/8” Al 10217 10239 10257
6AN 1/4" Al 10220 10242 10252A
6AN 3/8” Al 10222 10245 10258
6AN 1/2" Al 10218 - 10249
8AN 1/4" Al 10219 - 10267
8AN 3/8” Al 10221 10243 10253
8AN 1/2" Al 10225 10247 10268
8AN 3/4" Al 10177 - -
10AN 3/8” Al 10223 10248 10259
10AN 1/2" Al 10294 10297 10254
10AN 3/4" Al 10226 - 10299
12AN 1/2" Al 10227 - 10269
12AN 3/4" Al 10224 10244 10255
12AN 1” Al 10178 - -
16AN 3/4" Al 10206 - 10285
16AN 1” Al 10228 10246 10284
20AN 1” Al 10179 - -
20AN 1-1/4” Al 10207 - -

Female AN Flare to Male NPT Adapters

Straight

90° Swivel

Female
AN Size
Male
NPT Size
Straight Swivel
Part No.
90° Swivel
Part No.
3AN 1/8” 11365 11380
4AN 1/8” 11366 11381
4AN 1/4" 11367 11382
6AN 1/8” 11368 11383
6AN 1/4" 11369 11384
6AN 3/8” 11370 11385
8AN 1/4" 11371 11386
8AN 3/8” 11372 11387
8AN 1/2" 11373 11388
10AN 3/8” 11374 11389
10AN 1/2" 11375 11390
12AN 1/2" 11376 11391
12AN 3/4" 11377 11392

Male AN Flare to Male NPT 90° Swivel Adapters

Male
AN Size
Male
NPT Size
Part No.
3AN 1/8” 11350
4AN 1/8” 11351
4AN 1/4" 11352
6AN 1/8” 11353
6AN 1/4" 11354
6AN 3/8” 11355
8AN 1/4” 11356
8AN 3/8” 11357
8AN 1/2" 11358
10AN 3/8” 11359
10AN 1/2" 11360
12AN 1/2" 11361
12AN 3/4" 11362

Male AN Flare to Male NPT Straight Adapters

Male
AN Size.
Female
NPT Size
Part No.
3AN 1/8” 11308
4AN 1/8” 11309

NPT Union and Tee Adapters

NPT
Size
Male
Pipe Union
Part No
Female
Pipe Union
Part No.
90° Female
Pipe Adapter
Part No.
Female
Pipe Union
Part No.
Male
Pipe Union
Part No
Female
Pipe Union
Part No.
1/8" NPT 10370 10380 11320 11330 11340 10860
1/4" NPT 10371 10381 11321 11331 11341 10861
3/8” NPT 10372 10382 11322 11332 11342 10862
1/2" NPT 10373 10383 11323 11333 11343 10863
3/4" NPT 10374 10384 - - - -
1” NPT 10375 10385 - - - -

Male NPT to Female NPT Reducer Adapters

Part No. Male NPT Size Female NPT Size
10850 1/4" NPT 1/8" NPT
10851 3/8” NPT 1/8" NPT
10852 3/8” NPT 1/4" NPT
10853 1/2" NPT 1/8" NPT
10854 1/2" NPT 1/4" NPT
10856 1/2" NPT 3/8” NPT
10855 3/4" NPT 1/4" NPT
10857 3/4" NPT 3/8" NPT
10858 3/4" NPT 1/2" NPT

Female NPT to Male NPT
Tight 90° Adapter

Part No. Female
NPT Size
Male
NPT Size
10825 1/8" 1/8"

Oil Restrictor Fitting Kits

Our unique Oil Restrictor Fittings allow you to limit oil flow to your turbo, minimizing the potential of damaging the oil seals.

Includes a pair of threaded jets (.030", .045", .060") to allow for customized oil flow control.

An Allen Key and Loctite are also included.

Female NPT to Male BSP Adapter

Part No. Female
NPT Size
Male
BSP Size
10399 1/8" 1/8"
Part No. Application
10287 4AN x 7/16-24 Oil Restrictor Fitting for Garrett BB Turbos
10288 3AN x 1/8” NPT Oil Restrictor Fitting Ki
10289 4AN x 1/8” NPT Oil Restrictor Fitting Kit

Billet Aluminum Dry Break Quick Release Adapters

Vibrant Performance 6061 Billet Aluminum Quick Release Fittings are very lightweight and allow for quick and easy disassembly by hand of any fluid related component, without mess or spills.

Perfect for use on oil, fuel and coolant applications. NOT FOR USE WITH BRAKE OR OTHER HYDRAULIC PRESSURE SYSTEMS

Part No. AN Size
20804 4AN
20806 6AN
20808 8AN
20810 10AN
20812 12AN

Male AN Flare Unions (with 1/8" NPT Port)

Part
No.
AN
Size
16474 4AN
16476 6AN
16478 8AN
16480 10AN

Female AN to Male AN Flare Unions (with 1/8" NPT Port)

Part
No.
AN
Size
16484 4AN
16486 6AN
16488 8AN
16490 10AN

Male AN Flare to Male NPT Unions with 1/8" NPT Port)

Part
No.
AN
Size
NPT
Male
16495 6AN 1/4" NPT
16496 6AN 3/8" NPT
16497 8AN 1/4" NPT
16498 8AN 3/8" NPT

Male AN Flare 90° Unions
(with 1/8" NPT Port)

Part
No.
AN
Size
16536 6AN
16538 8AN

Male AN Flare Tees
(with 1/8" NPT Port)

Part
No.
AN
Size
16546 6AN
16548 8AN

Inverted Flare to AN
Adapters

Part
No.
AN
Size
Inverted
Flare
16435 6AN 1/2"-20
16436 6AN 5/8"-18
16438 8AN 5/8"-18

Female to Male Metric Union Extenders (with 3 x 1/8" NPT Ports)

Part
No.
Metric
Size
NPT
Size
10595 M12x1.5 1/8" NPT
10596 M14x1.5 1/8" NPT
10597 M16x1.5 1/8" NPT

AN Flare Caps

AN Flare Hex Head Plugs

NPT Hex Head Plugs

NPT Socket Pipe Plugs

Metric Port Plugs (incl. Crush Washer)

Part
No.
AN
Size
10450 3AN
10451 4AN
10452 6AN
10453 8AN
10454 10AN
10455 12AN
10455 16AN
Part
No.
AN
Size
10440 3AN
10441 4AN
10442 6AN
10443 8AN
10444 10AN
10445 12AN
10446 16AN
10447 20AN
Part
No.
NPT
Size
10880 1/8" NPT
10881 1/4" NPT
10882 3/8" NPT
10883 1/2" NPT
10884 3/4" NPT
Part
No.
NPT
Size
10490 1/8" NPT
10491 1/4" NPT
10492 3/8" NPT
10493 1/2" NPT
10494 3/4" NPT
10495 1" NPT
Part
No.
Plug
Size
16660 M10x1.0
16661 M10x1.25
16662 M12x1.5
16663 M14x1.5
16664 M16x1.5
16665 M18x1.5

Male AN Flare to Hose Barb Straight Adapters

Female AN Flare to Hose Barb Straight Adapters

Male Metric to Hose Barb Adapters (with Crush Washer)

Part
No.
AN
Size
Barb
Size
11207 6AN 0.375" (9.5mm)
11208s 8AN 0.50" (12.7mm))
11209 10AN 0.50" (12.7mm)
Part
No.
AN
Size
Barb
Size
11215 6AN 0.3125" (7.9mm)
11216 6AN 0.375" (9.5mm)
11218 8AN 0.50" (12.7mm)
Part
No.
Metric
Size
Barb
Size
11410 M10x1.0 0.3125" (7.9mm)
11412 M12x1.5 0.3125" (7.9mm)
11413 M12x1.5 0.375" (9.5mm)
11414 M12x1.5 0.50" (12.7mm)
11415 3AN 0.3125" (7.9mm)
11416 M14x1.5 0.375" (9.5mm)
11417 M14x1.5 0.50" (12.7mm)

Male NPT to Hose Barb Adapters

Straight Adapter

45° Adapter

90° Adapter

NPT
Size
Barb
Size
Straight
Adapter
Part No.
45°
Adapter
Part No.
90°
Adapter
Part No.
1/8" NPT 0.25” (6.4mm) 11200 11220 11230
1/4" NPT 0.375” (9.5mm) 11201 11221 11231
3/8” NPT 0.375” (9.5mm) 11205 11225 11235
3/8” NPT 0.50” (12.7mm) 11202 11222 11232
1/2" NPT 0.625” (15.9mm) 11203 11223 11233
3/4" NPT 0.75” (19.1mm) 11204 11224 11234

Male Barbed Push-On Adapters

Part
No.
Hose
Size
11240 4AN (1/4” x 1/4")
11241 6AN (3/8” x 3/8")
11242 8AN (1/2” x 1/2")
11243 10AN (5/8” x 5/8")
11244 12AN (3/4” x 3/4")
11245 6AN x 8AN (3/8” x 1/2")
11246 8AN x 10AN (1/2” x 5/8")
11247 10AN x 12AN (5/8” x 3/4"

Inline Barbed Union Adapters (with 1/8" NPT Female Port)

Part
No.
Hose
Size
10450 4AN (1/4” x 1/4")
10450 4AN (1/4” x 1/4")

Hose Barb Weld-On Bungs (6061 Aluminum and Mild Steel)

Barb
No.
Aluminum
Part No.
Mild Steel
Part No.
0.25" (6.4mm) 11180 11280
0.375" (9.5mm) 11181 11281
0.50" (12.7mm) 11182 11282
0.625" (15.9mm) 11183 11283
0.75" (19.1mm) 11184 11284
0.25" (6.4mm) 11180 11280

Male AN Flare Weld Bungs

Male
AN Size
Flange O.D. Aluminum
Part No.
Mild Steel
Part No.
4AN 0.75” (19.1mm) 11150 11250
6AN 0.875" (22.2mm) 11151 11251
8AN 1.00" (25.4mm) 11152 11252
10AN 1.125" (28.6mm) 11153 11253
12AN 1.375" (34.9mm) 11154 11254
16AN 1.625" (41.3mm) 11155 11255
20AN 1.75" (44.5mm) 11156 11256

Female AN Weld Bungs (Straight Thread)

Female
AN Size
Bung O.D. Aluminum
Part No.
Mild Steel
Part No.
4AN 0.75” (19.1mm) 11160 -
6AN 0.875” (22.2mm) 11161 11261
8AN 1.00” (25.4mm) 11162 11262
10AN 1.125” (28.6mm) 11163 11263
12AN 1.375” (34.9mm) 11164 --
16AN 1.625” (41.3mm) 11165 --

Female NPT Weld Bungs

Female
AN Size
Bung O.D. Aluminum
Part No.
Mild Steel
Part No.
1/8" NPT 0.75” (19.1mm) 11170 11270
1/4" NPT 0.875” (22.2mm) 11171 11271
3/8” NPT 1.00” (25.4mm) 11172 11272
1/2" NPT 1.25” (31.75mm) 11173 11273
3/4" NPT 1.375” (34.9mm) 11174 11274
1” NPT 1.625” (41.3mm) 11175 -

Tank Weld Bungs with Thread on Cap

http://store.perfecttuning.net/wp-content/themes/ecode/images/vibrant/
Weld Bung
O.D.
Weld Bung
Material
Thread-on
Cap Color
Part
No.
2.00" (50.8mm) Aluminum Polished 11290
2.00" (50.8mm) Aluminum Anodized Black 11291
2.75" (69.9mm) Aluminum Polished 11294
2.75" (69.9mm) Aluminum Anodized Black 11295
2.75" (69.9mm) Mild Steel Polished 11296
2.75" (69.9mm) Mild Steel Anodized Black 11297

Aluminum Weld-On Radiator Filler Necks and Radiator Caps

Weld Fitting

Cap

Filler Neck
Part No.
Filler Neck
Size
Matching Rad Cap
Part No.
20980 1.25" (31.8mm) 20981
20982 1.65" (41.9mm) 20983

Chevy LS Engine Oil Pressure Adapter

Part No. 16790

This oil pressure adapter fitting allows you to retain the factory oil pressure switchreference port to your turbo or any related accessory (e.g. oil pressure gauge). Includesthree crush washers.

1/8” NPT thread on Banjo.

Chevy LS Engine Fuel Pressure Adapter

Part No. 16791

This convenient new adapter fitting allows you to install an aftermarket fuel pressure gauge to your LS Engine’s factory fuel rail (must remove

Features Female 4AN thread on one end and Female 1/8” NPT thread on the other, making it useful for many other applications as well.

Inline Oil / Fuel Filter Sets

This unique, flow directional Oil/Fuel Filter kit includes a Male AN Flare Outlet Adapter, as well as both a Male and Female Inlet Adapters. Included in each set are interchangeable 30, 80 and 150 micron filter elements.

Included in each set are interchangeable 30, 80 and 150 micron filter elements.

Part No AN Size
16733 3AN
16734 4AN
16736 6AN
16738 8AN

Please Note:

  • 30 micron element is best suited for lightweight engine oil or pump gas
  • 80 micron element is recommended for heavy-weight engine oil, diesel, alcohol or ethanol fue
  • 150 micron element is for use with power steering and transmission oil.

Male AN Flare to Male AN Flare Flapper Style One Way Check Valves

Part No AN Size
11187 6AN
11190 8AN
11191 10AN
11192 12AN
11196 16AN

Female ORB to Male AN Flare Ball Style Inline One Way Check Valves

Part No Male
AN Size
Female
ORB Size
11116 6AN 9/16" -18
11118 8AN 3/4"-16

Male AN Flare to Male Metric EFI Fuel Pump Check Valves (incl. Crush Washer)

Part No AN Size Metric
11198 6AN M12x1.5
11199 8AN M12x1.5

Male AN Flare In-Tank Rollover Valves (incl. washer)

Part No AN Size
16716 6AN
16718 8AN
16720 10AN
16722 12AN

Fuel Cell Bulkhead Adapters (incl. Washers and Bulkhead Nut)

Part No AN Size
16892 6AN
16893 8AN
16894 10AN
16895 12AN
16896 16AN

Billet Aluminum Y-Block Adapters (with 1/8" NPT Port)

Part No Single
NPT
Dual
NPT
10820 3/8" NPT 3/8" NPT
10821 1/2" NPT 3/8" NPT
10822 1/2" NPT 1/2" NPT

One Piece 60° Y Adapters

Part No Size
10803 3AN x dual 3AN
10814 4AN x dual 3AN
10804 4AN x dual 4AN
10805 6AN x dual 4AN
10806 6AN x dual 6AN
10807 8AN x dual 6AN
10808 8AN x dual 8AN
Part No Size
10809 10AN x dual 8AN
10810 10AN x dual 10AN
10813 12AN x dual 8AN
10811 12AN x dual 10AN
10812 12AN x dual 12AN
10818 1/8” NPT x dual 3AN

Push-On EFI Adapters

Part No. AN Size Hose Size
16880 6AN 0.3125" (7.9mm)
16881 6AN 0.375" (9.5mm)
16882 6AN 0.375" (9.5mm)

Quick Disconnect EFI Adapters

Part No. AN Size EFI Line Size
16885 6AN 0.3125" (7.9mm)
16886 6AN 0.375" (9.5mm)
16887 8AN 0.375" (9.5mm)

Aluminum Hard Lines

Ideal for fuel, oil and water service. Flare the tube with a 37° flaring tool so these hard lines can be used with Vibrant Performance Tube Nuts and Sleeves

Part No. Description Quantity
16410 0.3125" (7.9mm) Aluminum Hard Line 25 ft. (7.62m) spool
16411 0.375" (9.5mm) Aluminum Hard Line 25 ft. (7.62m) spool
16412 0.50" (12.7mm) Aluminum Hard Line 25 ft. (7.62m) spool
16413 0.625" (15.9mm) Aluminum Hard Line 25 ft. (7.62m) spool

Hardline Cutting Tool

Cuts through Steel, Copper, Aluminum and Plastic tubing with ease and without distortion.For use on tubing measuring from 0.125” (3.175mm) to 1.125” (28.5mm).

Part No.2991

Tube to Female AN Adapters (incl. hardline brass olive)

Part No. AN Size Tube Size
16445 6AN 0.3125" (7.9mm))
16446 6AN 0.375" (9.5mm)
16448 8AN 0.50" (12.7mm)

Tube to Male AN Flare Adapters (incl. hardline brass olive)

Part No. AN Size Tube Size
16445 6AN 0.3125" (7.9mm)
16456 6AN 0.375" (9.5mm)
16458 8AN 0.50" (12.7mm)

Tube Sleeves

Part No. AN Size Use with
Tube Size
10760 3AN 0.1875” (4.8mm)
10761 4AN 0.25” (6.4mm)
10762 6AN 0.375” (9.5mm)
10763 8AN 0.50” (12.7mm)
10764 10AN 0.625” (15.9mm)
10765 12AN 0.75” (19mm)
10766 16AN 1.00” (25.4mm)

Tube Nuts

Part No. AN Size Use with
Tube Size
10750 3AN 0.1875” (4.8mm)
10751 4AN 0.375” (9.5mm)
10752 6AN 0.3125" (7.9mm)
10753 8AN 0.50” (12.7mm)
10754 10AN 0.625” (15.9mm)
10755 12AN 0.75” (19mm)
10756 16AN 1.00” (25.4mm)

Replacement Hardline Brass Olive Inserts

Part No. Use with Tube Size Package Quantity
16465 0.3125" (7.9mm) 5 / pack
16466 0.375" (9.5mm) 5 / pack
16467 0.3125" (7.9mm) 5 / pack

Universal Baffled Catch Can Assemblies

Part No. Color Recirculation Type
12694 Silver Open loop with filter
12695 Black Open loop with filter
12696 Silver Recirculating closed loop
12697 Black Recirculating closed loop

Vibrant Performance has developed a pair of new Universal,Internally Baffled Catch Can assemblies.

Our “OPEN LOOP” design features a recessed Stainless Steel Filter Element, and comes with two (2) Male 10AN Flare fittings integrated into the Catch Can’s top end cap.

The “CLOSED LOOP” design is designed for vehicles equipped with MAF Sensors. It features four (4) Male 10AN Flare fittings integrated into the top cap.

All of our new Catch Can Assemblies share the following features:

  • 6061aluminum construction.
  • Available in anodized black or andozed silver finish.
  • Tank Size: 4.00” (101.6mm) O.D. x 8.00” (203.2mm) tall.
  • Internally baffled to improve oil vapor capture and collection while preventing particulate from escaping.
  • 8AN drain plug integrated into bottom for easy draining or can be adapted as a return feed to the oil pan.
  • 304 stainless steel mounting bracket that can be clocked 360° to provide infinite mounting position options.
  • Dip stick included to easily check fluid levels.
  • Compatible with Vibrant Performance Fittings and Hoses.

TECH TIP

The Vibrant vented catch can is a perfect solution for cars with a MAP sensor based tuning system that need to expel crankcase pressure. The large 10AN fittings in the top cap will allow for ample flow out of the engine to the baffled catch can.

The Vibrant vented catch can is a perfect solution for cars with a MAP sensor based tuning system that need to expel crankcase pressure. The large 10AN fittings in the top cap will allow for ample flow out of the engine to the baffled catch can.

Aluminum Vacuum Manifold

Vibrant’s popular Aluminum Vacuum Manifold allows for consistent vacuum from a single source to be distributed through up to 6 ports.

  • Includes mounting hardware and port plugs.
  • Includes mounting hardware and port plugs.
  • Includes mounting hardware and port plugs.
Part No. NPT Thread Size Length Width Height Color
2690 6 x 1/8" NPT & 1 x 3/8" NPT 5.50" (139.7mm) 1.50" (38.1mm) 1.00" (25.4mm) Anodized Silver
2691 6 x 1/8" NPT & 1 x 3/8" NPT 5.50" (139.7mm) 1.50" (38.1mm) 1.00" (25.4mm) Anodized Black

Pneumatic Push Lock Vacuum Fittings

Vibrant Performance One Touch Fittings allow for simple and highly secure tube connections and are suitable for both ambient and pressurized air. Your vacuum tubing quickly disconnects from the fitting by simply pushing down on the release collar.

All threads are PTFE coated. Maximum Pressure 150 PSI.

Male Straight

Part No. Male NPT
Thread Size
O.D
Tube Size
2660 1/8" NPT 0.156" (3.97mm)
2662 1/8" NPT 0.25" (6.4mm)
2661 1/8" NPT 0.375” (9.5mm)
2664 1/4" NPT 0.25" (6.4mm)
2663 1/4" NPT 0.375” (9.5mm)

Male 90° Swivel Elbow

Part No. Male NPT
Thread Size
O.D
Tube Size
2665 1/8" NPT 0.156" (3.97mm)
2667 1/8" NPT 0.25" (6.4mm)
2666 1/8" NPT 0.375” (9.5mm)
2669 1/4" NPT 0.25" (6.4mm)
2668 1/4" NPT 0.375” (9.5mm)
2655 3/8" NPT 0.25" (6.4mm)
2653 1/2" NPT 0.25" (6.4mm)

Union Y

Part No. O.D. Tube Size
2680 0.156" (3.97mm)
2662 0.25" (6.4mm)
2681 0.375” (9.5mm)

Union Straight

Part No. O.D. Tube Size
2670 0.156" (3.97mm)
2672 0.25" (6.4mm)
2671 0.375” (9.5mm)

Union Tee

Part No. O.D. Tube Size
2675 0.156" (3.97mm)
2677 0.25" (6.4mm)
2676 0.375” (9.5mm)

Polyethylene Vacuum Tubing

Ideal for air lines and instrumentation. Withstands up to 100 PSI and is suitable for use at temperatures up to 140° F (60°C).

Part No. O.D. Tube Size Quantity Color
2660 0.156" (3.97mm) 10.00' Black
2652 0.25” (6.4mm) 10.00' Black
2683 0.156" (3.97mm) 0.25” (6.4mm) Clear
2651 0.375" (9.5mm) 10.00' Black

Billet Aluminum Line Separators

Small Diameter Hose Clamps

Vibrant Performance offers a wide variety of small diameter hose clamps, ideal for securing virtually any type and size of commonly used flexible hose.

Please refer to page 40 for a full application chart of available sizes.

Part No. Hole
Size
Use with AN
Hose Size
20605 0.19" (4.8mm) --
20606 0.25" (6.4mm) --
20608 0.31" (7.9mm) --
20609 0.38" (9.5mm) --
20611 0.43" (11.1mm) 4AN
20612 0.50" (12.7mm) --
20613 0.53" (13.5mm) --
20614 0.56" (14.2mm) 6AN
20616 0.63" (15.9mm) --
20617 0.66" (16.8mm) --
20618 0.69" (17.5mm) 8AN
20619 0.75" (19.1mm) --
20620 0.81" (20.6mm) 10AN
20622 0.88" (22.2mm) --
20624 0.94" (23.9mm) 12AN
20625 1.00" (25.4mm) --

Stainless Steel Cushioned P-Clamps

Secure your hose lines with these lightweight stainless steel P-Clamps, lined with neoprene rubber cushioning

Stainless Steel Pinch Clamps

These 300 series Stainless Steel pinch clamps provides 360 degree sealing with no gaps. The smooth inner band avoids hose damage.

Fuel Injector Style Mini Hose Clamps

These zinc plated mild steel clamps feature rounded edges to ensure the clamp grips firmly without cutting your hose.

Ideal for fuel, vacuum and washer fluid lines

Clean Cut Adhesive Tape