MaxxECU PRO PREMIUM

MaxxECU PRO PREMIUM

3,850.00$USD

Included:

MaxxECU PRO unit
MaxxECU V1/RACE/PRO flying lead wiring harness connector 1
MaxxECU PRO flying lead harness 3m connector 2 (EGT)
MaxxECU PRO flying lead harness 3m connector 3 (cyl 9-16, E-Throttle, extra out)
MaxxECU PRO flying lead harness 3m connector 4 (extra in/out, CAN 2, KNOCK)
Lambda Sensor Bosch wideband lambda LSU 4.2
Connector 6-way socket housing (LSU 4.2 wideband sensor)
Connector 12-way socket housing GT150 (fits MaxxECU harness)
MaxxECU Bluetooth mobile antenna
MaxxECU USB PC cable 1.5m (STREET/V1/RACE)
MaxxECU hose kit (MAP sensor incl nipples)
MaxxECU extra cable for installations

Qty:
Compare
SKU: MAXXECU-1624 Categories: ,

Description

Target Engines of MaxxECU PRO
  • All 1-12 cylinder engines (4-stroke)
  • Up to 12 cylinders fully sequentially
  • Up to 12 cylinders in wasted spark
MaxxECU PRO inputs
  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • Dual lambda (WBO) sensor. Uses sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
  • 6 temperature sensors. Can be used for logging or control of additional functions
  • 16 0-5V inputs. Can be used for additional sensors such as measurement of fuel / oil pressure
  • 10 digital inputs used for example speed sensors (4 can use VR-sensors) or switches
  • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
  • 12 EGT TYPE-K/N inputs with separate harness (up tp 1200C/2200F
MaxxECU PRO outputs
  • 16 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
  • 12 ignition outputs. 5V signals to drive ignition modules, CDI units / coils
  • 30 extra outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8 (2A), GPO 9/10 (5A), GPO 11-14(2A), GPO 15-23 (12V sourcing, 4A), GPO 23-30 (1.5A)
  • Dual E-Throttle support
MaxxECU PRO technical
  • CAN bus for expansion modules, OEM vehicle CAN, OBDII
  • USB communication for tuning with MTune
  • Bluetooth for connecting to mobile devices with MDash
  • 8MB memory for internal logging, up to 1000Hz
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor. Three extra processors to handle the triggers, injectors and EGT
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • 50Hz sampling rate on all EGT inputs
  • 1000Hz sampling rate on all analog inputs
  • Weight: 1137g
  • 252x180x40mm excluding protruding connectors
  • Built-in accelerometer up to 8G
  • Waterproofed aluminium case with shock absorbers

Additional information

Weight 3 kg
Dimensions 30 × 30 × 12 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

X