DiamondFinish Clear

• Formulated to Apply Directly Over Other Coatings and Paints or Direct To Metal (DTM)!
• Permanent Clear Coat, High Solids (over 60%), and low VOC’s Clear Coat.
• Ideal for Direct To Metal (DTM) applications – No Adhesion Additives Needed!
• Moisture Cured Urethane, an advanced coatings technology offering durability, flexibility, corrosion, and chemical resistance.
• Easy To Apply directly to Painted Surfaces with Minimal Surface Prep.
• Incredibly Tough and Hard like no other clear coat on the market.
• Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking, or peeling.
• Exterior grade UV Stable Clear Coat. DiamondFinish Clear is not affected by sunlight. Does not chalk, yellow, or fade.
• Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
• Compatible with fully cured water based acrylics, urethanes, and other water based base coats to add protection, durability, and clarity.
• Extremely easy to wet sand, cut, buff, and polish to create a deep mirror finish.
• Unlike normal two part (2K) coatings, no hardener or activator is needed. You can simply stir well and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
• Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part (1K) or Two Part (2K) paints. It can be applied to Ferrous Metals such as mild steel, carbon steel, stainless steel, cast iron, and wrought iron. It can also be applied to Non-Ferrous metals including Aluminum, Alloys, Brass, Chrome, and Copper.
• Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
• Graffiti Resistant: because of its chemical resistance, graffiti just won’t stick and can be removed simply with a solvent soaked rag.
• Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.

Click HERE to Get Answers To Your Questions

• Over 60% Solids which Means Ultra Durability
• Direct To Metal Application – No Additives Needed
• Ideal Clear Coat for Gelcoat Surfaces, Fiberglass Surfaces, and Carbon Fiber Surfaces
• Apply Directly to Painted Surfaces
• Single Part Formula
• Polishable After 24 Hours
• Tougher, Harder and Easier To Use than 2 Part (2K) Clear Coats
• Clear coat over fully cured water based acrylics, urethanes, and other water based coatings
• Seals and Coats both Paints & Metals
• Self Leveling (No Brush Marks)
• Simple Brush, Spray or Roll Application
• Wet sand, cut, buff, and polish to create a deep mirror finish
• Permanent UV Stability – Does Not Yellow or Fade
• High Chemical Resistance (including some fuels)
• High Temperature resistance (300F) suitable for Motors and Brake Calipers
• Once fully cured, DiamondFinish Clear is 100% non-toxic
• Graffiti Proof
• Re-coat in 1-2 hours
• Seals Ferrous and Non-Ferrous metals
• Shelf Life: At least 2 years when unopened from date of purchase. After opening, when the directions for use and storage are followed, typically 6 months.

Click HERE to Get Answers To Your Questions

• Protecting steel and plastic bumpers paint work.
• Ideal for clear coating Fishing Lures and Crankbaits
• Automotive aluminum fitting, fuel tanks and parts.
• Protecting existing paint work from physical damage.
• Stopping chemical attack from acids and alkalis on existing paint work.
• Protecting paint work from all fuels.
• Ideal for fully cured water based acrylics, urethanes, and other water based coatings.
• Ideal for clear coating Tumblers.
• Ideal for clear coating custom Coasters.
• Used by Boaters to Revitalize Clear Coat on Fiberglass Boats – Boat Bottoms and Boat Topsides.
• Excellent Clear Coat to Clear Coat Aluminum John Boats.
• Graffiti Protection.
• Custom Automotive Refinish.
• Marine internal and external Refinish.

Click HERE to Get Answers To Your Questions

Theoretical coverage at 2 mils dry film thickness is 400-450 sq.ft. per gallon.

Recommended thickness of at least 4 mils dry film thickness requires at least two full coats.

For marine type applications, applications where the surface is consistently exposed to water, or applications where bare metal rust protection is key, at least three coats is recommended.

Material losses during mixing and application will vary and must be taken into consideration. Please expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.

• 4oz of DiamondFinish Clear should cover 12.5 sq. ft. single coat coverage.
• Pint of DiamondFinish Clear should cover 50 sq. ft. single coat coverage.
• Quart of DiamondFinish Clear should cover 100 sq. ft. single coat coverage.
• Gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.
• 5 Gallon Pail of DiamondFinish Clear should cover 2000 sq. ft. single coat coverage.

Click HERE to Get Answers To Your Questions

Volume Solids: 62 +/- 2.0%

Weight Solids: 66 +/- 2.0%

Weight Per Gallon: 8.8 +/- 0.2 lbs/gallon

Viscosity: 27-33 seconds #2 Zahn cup

QUV 313B: 1000 hours

Pencil Hardness: 2H @ 7 Days

10% Sodium Hydroxide: Excellent

Impact Direct/Indirect: 160 inch-pounds

Dry Heat Resistance: 1 hour at 300F, less than 1.0 DE

Salt Spray (B117): Q-Steel coated at 5-6 mils dft (3 coats): 1000 hrs