Showing 1–25 of 130 results
-
100 PSI MAP Sensor (7 bar) 1/8″ NPT
85.00$USDQuick View7 bar MAP sensor (0- 100 psi absolute) Heavy duty
*** THIS SENSOR IS COMPATIBLE WITH AIR ONLY*** DO NOT USE IT WITH OIL AND FUEL.
The sensor do not come with a cable. Please add one if you need one.
-
MS3Pro-PNP Toyota Supra 86.5 – 88 ECU for 7M-GTE and 86.5-92 7MGE
1,350.00$USDQuick ViewThis MS3Pro Plug and Play ecu is working for BOTH engines! Only few jumpers to move inside the casing, load a new tune and your ready to start you other engine!
-
Toyota Supra 89-92 MS3Pro Plug and Play ECU for 7M-GTE and 1JZ-GTE
1,350.00$USDQuick ViewThis MS3Pro Plug and Play ecu is working for BOTH engines! Only few jumpers to move inside the casing, load a new tune and your ready to start you other engine!
-
MS3Pro-PNP Toyota Chaser JZX100
1,350.00$USDQuick View1996 – 2001 Toyota Chaser (1JZ-GTE VVTI) with manual transmission.
Fully Plug and Play.
Pre-loaded base map. -
-
MS3Pro-PNP Nissan Skyline, 300ZX, RB25, RB26, VG30DETT
1,350.00$USDQuick ViewFully programmable MS3Pro-PNP ecu for Nissan Skyline, GTR, GTS-T, 300ZX Z32, RB25, RB26, VG30DETT.
-
12v Buzzer
20.00$USDQuick View12v Buzzer that can be used with the Perfect Tuning Universal Gauge when an alarm occurs.
-
1jz 2jz Engine stand bolt kit Long
16.00$USDQuick ViewBolts used to bolt the 1jz or 2jz to an engine stand.
High quality 10.9 bolt grade with washers. 80mm 3” long
-
1JZ 2JZ LQ9 D585 Ignition Coil Conversion bracket kit (without coils)
138.00$USDQuick View*** Carbon version that is in stock!!! Check the other listing ***
1JZ 2JZ GM LQ9 D585 LS Ignition Coil Conversion bracket kit (without coils)
One of the best ignition coil on the market. Capable of making well over 1000 rwhp.
Kit include:
3x Coil Bracket
6x Blue Isolation boot with spring
6x LQ9 D585 connector with crimp. -
1JZ 2JZ Pulley kit aluminium black or silver
95.00$USDQuick ViewPulley kit aluminium machined billet silver or black anodize
Compatible with 1JZ 2JZ
– Alternator pulley
– USDM Water pump pulley
– Power steering pulley -
1jz 2jz R154 bellhousing bolt kit
27.00$USDQuick ViewBolts used to bolt the 1jz or 2jz transmission bell housing to the engine block.
Include 2x starter bolts (long enough if your starter holes are not threaded).
High quality 10.9 bolt grade with lock washers.
-
1JZ 2JZ to CD009 CD00A adapter to use with Toyota bellhousing
595.00$USDQuick View1jz-gte, 2jz-gte vvti or non vvti to Nissan 350z, Infinity G35 (CD009 also named JK), 370z or G37 (CD00A) transmission adapter plate kit.
-
1JZ-GTE Intake Manifold kit
650.00$USD – 800.00$USDQuick ViewThis item generally take 3-4 weeks to ship.
Aftermarket Intake Manifold for the 1JZ-GTE non vvti or VVTI.
Comes with 90mm throttle body without tps but compatible with stock tps.
Comes with 14mm fuel rail. Compatible with Injector dynamics and FIC injectors 60mm x 14mm
Select the color when placing the order (black or silver)
*Pedal not included in the DBW kit
-
2jz OEM Fuel Pressure Regulator Adapter
20.00$USDQuick ViewFuel Pressure Regulator Adapter for Toyota (4E-FTE, 2JZ-GTE with and without vvti), Nissan, Subaru, Mazda…
1x straight 1/8 NPT to barb and 1x 1/8 NPT to AN6 straight fitting included
Black anodized aluminium
-
2JZ-GE Intake Manifold kit
650.00$USD – 800.00$USDQuick ViewThis item generally take 3-4 weeks to ship.
Aftermarket Intake Manifold for the 2JZ-GE non vvti or vvti.
Comes with 90mm throttle body without tps but compatible with stock tps.
Comes with 14mm fuel rail. Compatible with Injector dynamics and FIC injectors 60mm x 14mm
Select the color when placing the order (black or silver)
*Pedal not included with DBW kit
-
2JZ-GTE Intake Manifold
650.00$USD – 800.00$USDQuick ViewThis item generally take 3-4 weeks to ship.
Aftermarket Intake Manifold for the 2JZ-GTE non vvti and VVTI.
Comes with 90mm throttle body without tps but compatible with stock tps.
Comes with 14mm fuel rail. Compatible with Injector dynamics and FIC injectors 60mm x 14mm
Select the color when placing the order (black or silver)
*Pedal not included with DBW kit
-
2JZ-GTE T4 Twin scroll manifold
580.00$USDQuick View2JZ-GTE T4 Twin scroll manifold made of 3mm thick schedule pipe. Very strong manifold.
Comes with a 44mm v-band wastegate flange.
Compatible with NON-VVTI and VVTI 2JZ-GTE
-
50 PSI MAP Sensor (3.5 bar) 1/8″ NPT
75.00$USDQuick View3.5 bar MAP sensor (0- 50 psi absolute) Heavy duty
*** THIS SENSOR IS COMPATIBLE WITH AIR ONLY*** DO NOT USE IT WITH OIL AND FUEL.
The sensor do not come with a cable. Please add one if you need one.
-
60A Automotive relay with fuse
10.00$USDQuick View60A/80A 12v relay with automotive 30A fuse.
Light indicator when the relay is active.
Support bracket included.
Cable with socket included. -
-
Bluetooth adapter for ECUMaster EMU or EMU Black
85.00$USDQuick ViewCommunicate with your ECUMaster EMU or EMU Black wirelessly via Bluetooth. This replace the need of a serial cable.
Compatible with Windows XP to Windows 10 and work with any Android device. The module IS NOT compatible with iOS devices (iPhone or iPad).
Working range: around 15 feets (5 meters)
Cable length: 3 feets (1 meter)
-
Bluetooth adapter for MS2 and MS3
70.00$USDQuick ViewNOT PLUG AND PLAY WITH MICROSQUIRT. See below for more details.
Communicate with your MS2 or MS3 wirelessly via Bluetooth. This replaces the USB serial cable.
Compatible with Windows XP to Windows 10 and work with any Android device. The module IS NOT compatible with iOS devices (iPhone or iPad).
Work well with TunerStudio, MSDroid, Shadow Dash MS
Working range: around 15 feets (5 meters)
Cable length: 3 feets (1 meter)
-
Bluetooth adapter for MS3Pro EVO / Ultimate
70.00$USDQuick ViewCommunicate with your MS3Pro EVO or MS3Pro Ultimate wirelessly via Bluetooth. This replace the need of a serial cable.
Compatible with Windows XP to Windows 10 and work with any Android device. The module IS NOT compatible with iOS devices (iPhone or iPad).
Work well with TunerStudio, MSDroid, Shadow Dash MS
Working range: around 15 feets (5 meters)
Cable length: 3 feets (1 meter)
-
-
Boost Control solenoid 4 ports
95.00$USDQuick View12v Boost Control Solenoid
Rated VAC to 120 psi (upto 8.2 bar) pressure
Comes with 2 1/8 barb fitting, 1x muffler, 1 waterproof connector, 1x holding back plate with screws.
