MicroSquirt ECU Version 3.0 DIYAutoTune

MicroSquirt ECU Version 3.0 DIYAutoTune

460.14 $CAD

SKU: DIY-MicroSquirt Category:


The versatile MicroSquirt ECU Version 3.0 is an ECU plus much more – Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module (alternate functionality requires firmware change)

MicroSquirt ECU is our entrylevel, fully assembled ECU with varied applications targeting power sport and single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark outputs. Over 40 different ignition modes are supported from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis to unusual modes like Renix Jeep and the Suzuki Swift GTI.
MicroSquirt ECU Software Features

  • Supports speed density, alphaN (TPS based), or MAF based fuel and spark tables
  • 0.66 microsecond injector pulse width resolution
  • Allows blending multiple load types, including specialized mode for independent throttle bodies
  • Supports a wide variety of OEM cam and crank position sensors
  • Accelerator pump or model based acceleration enrichment
  • Closed or open loop idle speed and boost control On/off nitrous control
  • Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables
  • Staged injection
  • Table switching
  • 16 x 16 fuel and spark tables
  • 2 step rev limiter (launch control) with nolift shifting
  • Wideband AFR target table
  • Flex fuel sensor input
  • Real time barometric correction (external sensor required)
  • Sequential shift cut and air shifter control

MicroSquirt ECU Transmission Control Options
MicroSquirt transmission control free firmware allows you to use MicroSquirt with 30 inch Harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of our ECU’s over canbus.

Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 & more…
MicroSquirt ECU CAN I/O Box Expansion
Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug n play I/O extension box for MS3 or MS3Pro ECUs.

It can offer a useful I/O addition:

  • 7 Analog inputs (05V variable)
  • 2 Wheel speed inputs (VR or hall type)
  • 2 Wheel speed (hall type) or groundswitch inputs
  • 1 dedicated groundswitch input
  • 2 high current PWM/switch groundswitching outputs
  • 4 mid current PWM/switch groundswitching outputs
  • 1 low current PWM/switch 012V output

Perfect for capturing and logging vehicle speed and additional sensor data (e.g. pre and post intercooler temperatures, fuel pressure, oil temperature etc.)

Additional information

Weight 0.23 kg
Dimensions 16.51 × 5.08 × 9.525 cm