Open Tip EGT Probe Black Stinger 3/16 Diameter DIYAutoTune

Open Tip EGT Probe Black Stinger 3/16 Diameter DIYAutoTune

100.77 $CAD

SKU: DIY-EGT-Prb-4018 Category:


Measure your exhaust gas temperature per bank or per cylinder with this open tip EGT probe. It is a K type thermocouple with an 8 foot lead. The open tip EGT probe reads slightly faster than an enclosed tip probe, but tends to wear faster in extreme heat conditions. Compatible with CANEGT or Innovate TC-4, LMA-3, or DL-32, and many other temperature devices. Diameter is 3/16 inch.

Multi-channel EGT systems add another dimension. Generally speaking, one looks for consistency between cylinders, because any noticeable variation means that the cylinder that is out of step with the rest has some sort of problem like a flow blockage, an inner chamber variation, or a cam lobe shift that is causing the odd EGT. On an EFI engine, a simple fuel rate change to the out of step cylinder will aid in detecting the cause of the variation by either confirming or rejecting fuel (and air) flow variation as the cause. 

The ideal mounting location for your open tip egt probe will be high in the exhaust runner in a consistent position cylinder-to-cylinder, normally 1 to 3 inches from the header mounting flange (approximately 6 to 9 inches from the actual in-cylinder burn) and at a common depth in the flow path. Other acceptable locations are in the collector, where temp data for the bank is averaged, or in a single exhaust runner, positioned in the same way you’d place it for a multi-channel setup.

  • 3/16 Inch Diameter
  • Open tip Tip
  • Black

Additional information

Weight 0.14 kg
Dimensions 19.05 × 1.27 × 10.16 cm